Shale Shaker-Basket Mechanism

The shale shaker basket should be capable of adjusting its angle to accommodate numerous flow rates of drilling fluids in the solids control system and to maximise the utilization of the shaker bed, this can be wherever the fishing mechanism plays a vital half.
The lubricant flowing over the shaker bed is selected into 2 categories:
Pool: that is that the space of the screening deck that consists principally of lubricant with trained cuttings suspended inside it.
Beach: is that the space wherever the fluid has been principally faraway from the cuttings and that they begin to appear sort of a pile of solids.

As a rule of thumb the Beach and pool area unit maintained at a quantitative relation of eightieth pool and two hundredth beach, this in fact will modification reckoning on the necessities of cutting waterlessness and flow rates.

The mechanism plays an important role in solids control.
There area unit numerous fishing mechanisms presently in use that vary from hydraulic to gas and mechanical, they will be controlled from either one facet of the shaker or should be adjusted one by one per facet. Mechanical fishing mechanisms usually will be terribly dependable often requiring less maintenance however typically take longer to control than their hydraulic or gas counterparts wherever because the hydraulic/pneumatic fishing mechanisms area unit a lot of quicker to control and need less a physical means that of operation.


Brightway Shaker deck angle adjustment:
There are lifter, pipe, lifter pipe, scale indicator, scale, connection plate, etc. When we make adjustment, handle wheel rotary by clockwise, shaker deck angle will be larger; handle wheel rotary by anti clockwise shaker deck angle will be less.
Shale shaker output angle adjustment can be operated under running and off. When finish the shaker deliver it, the shaker deck is 0°. When user operate shaker, according to drilling mud property and flow rate on job site, and adopts same shaker screen, the angle is higher, the treating performance will be better while treating capacity will be higher. When drilling fluid is leaking on shaker deck, increase deck angle can get rid of fluid flow away.
Angle is 0~ +5°