Shipment of Centrifuge pump, jet mud mixer and mud guns

August 7th, 2013 , Brightway finished a shipment for a Singapore drilling platform with centrifugal pumps , brine pumps ,Jet mud mixers and mud guns.

centrifugal pump, jet mud mixer, mud gun

Operation Instruction of the centrifugal pump:

1. Before operation, please ensure the rotating direction of the motor is correct. Turning the pump axis by hand, it needs to work normally and the opposite working direction forbidden.

2. Pouring the liquid full of the pump and inlet piping in order to discharge the air, it works normally.

3. When the pump work continuously, no need to clean the pump, but when it stopping work, must wash it by clean water in order to avoid the aging of the pump body and impeller because of the rust, which influence the future usage.

4. All the bearings of the pump are added with lubricating grease as our regulation before shipment. When the work temperature is below 120℃, no need to add the lubricating grease, but above 120℃, must add the lubricating grease regularly in order to guarantee the pump lifetime.

5. For the lubricating grease, must adopt the one compatible to the original bearing grease, otherwise, bad lubricating effect shortens the bearing lifetime.

6. In the condition of high work pressure and high temperature, suggest to check the lubricating grease in the centrifugal pumps every day, if necessary, add the lubricating oil to the bearings.

-The End-