Have a good at the below video to see how the walkways and guardrails being folded.
Video of walkways and guardrails folding
-End-
XI'AN LITTLE ORANGE LIGHT CO., LTD provide the full range of products in the trenchless industry including the HDD machine, pipe jacking machine, mud recycling system, generator and all the associated products.
With our professional knowledge and resources, we build and grow the credit!
July 29, 2013
Video of walkways and guardrails folding in solids control system
When we design and produce the solids control system, we use the folding design in order to bring the convenience to customer in transportation or on the post.
Have a good at the below video to see how the walkways and guardrails being folded.
Have a good at the below video to see how the walkways and guardrails being folded.
July 26, 2013
How hydracyclone works?
Hydrocyclones (also referred to as cyclones or cones) are simple mechanical devices, without moving parts, designed to speed up the settling process. Feed energy is transformed into centrifugal force inside the cyclone to accelerate particle settling in accordance with Stoke’s Law. In essence, a cyclone is a miniature settling pit which allows very rapid settling of solids under controlled conditions.
Hydrocyclones are important in solids control systems because of their ability to efficiently remove particles smaller than the finest mesh screens. They are also uncomplicated devices, which make them easy to use and maintain.
A hydrocyclone consists of a cylindrical/conical shell with a small opening at the bottom for underflow discharge, a larger opening at the top for liquid discharge through an internal “vortex finder”, and a feed nozzle on the side of the body near the cylindrical (top) end of the cone.
Drilling mud enters the cyclone using energy created by a centrifugal feed pump. The velocity of the mud causes the particles to rotate rapidly within the main chamber of the cyclone. Heavy, coarse solids and the liquid film around them tend to spiral outward and down-ward for discharge through the solids outlet. Light, fine solids and the liquid phase of the mud tend to spiral inward and upward for discharge through the liquid outlet.
Hydracyclone is used in our drilling fluids equipment such as desander, desilter, and mud cleaner. It is normally the 2nd or 3rd phase of the mud purifying system.
Hydrocyclones are important in solids control systems because of their ability to efficiently remove particles smaller than the finest mesh screens. They are also uncomplicated devices, which make them easy to use and maintain.
 |
| Hydracyclone |
A hydrocyclone consists of a cylindrical/conical shell with a small opening at the bottom for underflow discharge, a larger opening at the top for liquid discharge through an internal “vortex finder”, and a feed nozzle on the side of the body near the cylindrical (top) end of the cone.
Drilling mud enters the cyclone using energy created by a centrifugal feed pump. The velocity of the mud causes the particles to rotate rapidly within the main chamber of the cyclone. Heavy, coarse solids and the liquid film around them tend to spiral outward and down-ward for discharge through the solids outlet. Light, fine solids and the liquid phase of the mud tend to spiral inward and upward for discharge through the liquid outlet.
Hydracyclone is used in our drilling fluids equipment such as desander, desilter, and mud cleaner. It is normally the 2nd or 3rd phase of the mud purifying system.
 |
| Desander |
 | ||
| Desilter
-The End-
Alice
|
July 24, 2013
Spring Blossom
Being the sales of Brightway, the manufacturer of the drilling fluids equipment and drilling fluids system, I sell equipment such as shale shaker, mud cleaner, desander, desilter, centrifuge,mud gas separator, and tank system etc.
The above equipment seems no relationship with my topic-Spring blossom, while I enjoy in my work communicating with people all over the world not only from the aspect of business, but also about life.
I share below lyrics with my customers and my friends all over the world, which I translated from the Chinese song I like.
I like this lyrics because it just tells my feelings to my family.
I believe that we all have something in common.
Spring Blossom
If you desire a drop of water
I'd like to give you the sea
If you want a piece of autumn leaf
I'd give you the maples and the clouds
If you want a smile
I'd like to open my fiery heart
If you need someone to accompany you
I am with you forever
Spring blossom
This is my world
Every bloom
Is love bursting forth
The wind passing by
Is the dialogue between the sky and I
Happiness actually
Will always be with us
If you want a smile
I'd like to open my fiery heart
If you need someone to accompany you
I am with you forever
Spring blossom
This is my world
Every bloom
Is love bursting forth
The wind passing by
Is the dialogue between the sky and I
Happiness actually
Will always be with us
Spring blossom
This is my world
Life is like water
sometimes peaceful sometimes surging
Look through the haze
Its sunshine on your window
Happiness actually
Will always be with us
My world
Spring blossom
-End-
Alice
The above equipment seems no relationship with my topic-Spring blossom, while I enjoy in my work communicating with people all over the world not only from the aspect of business, but also about life.
I share below lyrics with my customers and my friends all over the world, which I translated from the Chinese song I like.
I like this lyrics because it just tells my feelings to my family.
I believe that we all have something in common.
Spring Blossom
If you desire a drop of water
I'd like to give you the sea
If you want a piece of autumn leaf
I'd give you the maples and the clouds
If you want a smile
I'd like to open my fiery heart
If you need someone to accompany you
I am with you forever
Spring blossom
This is my world
Every bloom
Is love bursting forth
The wind passing by
Is the dialogue between the sky and I
Happiness actually
Will always be with us
If you want a smile
I'd like to open my fiery heart
If you need someone to accompany you
I am with you forever
Spring blossom
This is my world
Every bloom
Is love bursting forth
The wind passing by
Is the dialogue between the sky and I
Happiness actually
Will always be with us
Spring blossom
This is my world
Life is like water
sometimes peaceful sometimes surging
Look through the haze
Its sunshine on your window
Happiness actually
Will always be with us
My world
Spring blossom
-End-
Alice
July 23, 2013
Know about CBM drilling
What is coal bed methane?
Coal bed methane is natural gas that occurs in coal beds and has been generated during the conversion of plant material to coal (the process known as coalification).
Coal bed methane is produced from a broad range of coal from low rank subbituminous coal through to high rank bituminous coal.
What are the key ingredients for CBM production?
Known, thick, abundant and laterally continuous coal beds
Coal-bearing areas with coals of appropriate rank
Indications of favourable reservoir for accumulation and preservation of coal bed methane
Relatively shallow deposits ~ less than 1,000m
Evidence of fracturing and faulting in coal, correct geothermal gradient
The presence of gas fields producing from coal-bearing rocks
 |
| CBM drilling |
Brightway CBM drilling mud recycling system is normally with the capacity as 350 GPM and 500 GPM.
The main relative equipment are shale shaker, mud cleaner, centrifuge,mud gas separator, tank, etc.
-End-
Share the words I like:If you like a smile, I open my fiery heart completely.
-- Translated from the song 'Spring blossom'
July 20, 2013
Where is Brightway?
Our factory name is Brightway Energy Machinery Equipment Co., Ltd, located in the ancient and young city, Xi'an, China. We are the manufacturer of the solids control equipment and complete set of solids control system.
I like the word-Brightway as I'd like to look at the world and life from the bright aspect. Interesting that it is can not been found in dictionary, just a combination word from Chin-English.
Share a picture here of our factory in rainbow, which was a surprising gift I found last month as I had forgotten how many years ago I saw the last rainbow.
Back to the word 'Brightway', I believe a real brightway in the way of your heart no matter the life way rainy,cloudy,windy or sunny.
I like the word-Brightway as I'd like to look at the world and life from the bright aspect. Interesting that it is can not been found in dictionary, just a combination word from Chin-English.
Share a picture here of our factory in rainbow, which was a surprising gift I found last month as I had forgotten how many years ago I saw the last rainbow.
 |
| Brightway factory in rainbow |
-End-
Alice
Share the words I like: If you like a piece of red leaf, I'd like to give you the whole maples and beautiful clouds.
- Translated from the song 'Spring blossom'
- Translated from the song 'Spring blossom'
(如果你要摘一片红叶，我给你整个枫林和云彩)
July 19, 2013
Why Galvanizing Treatment Much Better Than The Normal Painting Process?
What is the difference between the galvanizing treatment and the normal painting process?
There are mainly 3 points,and let's have a look one by one.
1. The anti-rust performance of galvanizing treatment is much better than the normal painting process.
In our daily life, normally the galvanizing treatment is applied for the outdoor tubes or the underground tunnels from the consideration of the anti-rust.
The below picture is one corner of the galvanizing factory, from which you can see there are mainly for outdoor or underground use.
We apply the galvanizing treatment on our equipment and system, and in a word, it is to improve the anti-rust performance.
2.For the galvanizing treatment, there is no corner missed in this process,and both inside and outside.
In the below 2 pictures, one is to see the galvanizing treatment inside the tube, the other is to see this treatment inside the shale shaker buffer box.
3.Nice appearance of the galvanizing treatment.
Taking the example of the solids control system, let's see where the galvanizing treatment is applied?
 |
| Mud system |
 |
| shale shaker |
 |
| mud agitator |
 |
| hopper |
 |
| folding walkway |
 |
| guardrail |
 |
| ladder |
- How about the process of the galvanizing treatment?
Process : Picking-Galvanizing-Cooling-Inactive-Finepolishing
-The End-
Alice
Share the words I like: If you desire a drop of water, I'd like to give you a sea.
- Translated from the song 'Spring blossom'
Have a look at Brightway mud agitator!
Brightway mud agitators include an explosion-proof motor, reduction gearbox (helical-bevel for horizontal agitators), impeller, and shaft with assembly bushings. Motors range from 5.5kw to 15kw.
 |
| Brigthway mud agitator |
Attaching the motor directly to the gearbox prevents misalignment that can result in premature bearing failure and provides 95 percent efficiency in power transfer to the impeller. Using this superior design surpasses standard worm drive gear assemblies by 30 percent, allowing Brightway mud agitators to do the same work at far less power. By unitizing the motor and gearbox, weight and space requirements are reduced. Power, mechanical configuration, impeller diameter, and shaft length are customized to tank dimensions and maximum mud weights.
Available power ratings* are: 5.5kw, 7.5kw, 11kw, 15kw.
How about the Brightway shale shaker screen?
Brightway manufacture a full inventory of shale shaker screens in a board range of mesh sizes to ensure maximum solids control efficiency regardless of the formations drilled.
The below is the list of the related ranges.
1. Screens to match with Brithway shale shaker
BWZS70-3P/BWZS85-2P
|
|
Mesh
|
20---320
|
Dimension
(+/- 1/16Inch)
|
Length:49 “
|
Width:29”/33.5”
|
|
Height:1”
|
|
Weight
|
34 +/- 1lbs
|
Layer
|
2
|
Screen material
|
S.S304
|
Side rubber
width
|
5mm
|
Frame material
|
Carbon steel
|
2.Derrick 500 Series screen
Derrick 500 Series PMD/PWP Screen
|
|
Mesh
|
20---320
|
Dimension (+/- 2mm)
|
Length:1050mm
Width:697mm
Side Clamp
height:46mm
|
PWP Weight
(+/-0.5kg)(Flat
Screen)
|
6.0kg
|
PMD Weight
(+/-0.5kg)(Pyramid
Screen)
|
7.5 kg
|
Layer
|
2
|
Screen material
|
S.S304
|
Frame material
|
Carbon steel
|
3.Derrick 2000 screen
Derrick 2000 Series PMD/PWP Screen
|
|
Mesh
|
20---320
|
Dimension (+/- 2mm)
|
Length:1053mm
Width:697 mm
|
PWP Weight
(+/-0.5kg)(Flat
Screen)
|
4.2 kg
|
PMD Weight
(+/-0.5kg)(Pyramid
Screen)
|
5.8 kg
|
Layer
|
2
|
Screen material
|
S.S304
|
Frame material
|
Carbon steel
|
4.NOV Brandt Cobra screen
Brandt Cobra screen
|
|
Mesh
|
20---320
|
Dimension
(+/- 1/16Inch)
|
Length:25inch
|
Width:49
5/16inch
|
|
Height:1inch
|
|
Weight
|
34 +/- 1lbs
|
Layer
|
2
|
Screen material
|
S.S304
|
Side rubber width
|
5mm
|
Frame material
|
Carbon steel
|
5.MI-SWACO Mongoose Shaker Screen
MI-Swaco Mongoose Shaker Screen
|
|
Mesh
|
20---320
|
Dimension (+/- 2mm)
|
Length:1165mm Width:585 mm
|
PTC Weight
(+/-0.5kg)(Steel
Frame Screen)
|
12 kg
|
Layer
|
2
|
Screen material
|
S.S304
|
Frame material
|
Carbon steel
|
6.KEM-TRON KTL-48 shaker screen
KEM-TRON KTL-48 Shaker Screen
|
|
Mesh
|
20---320
|
Dimension (+/- 2mm)
|
Length:1220mm Width:710 mm
|
PTC Weight (+/-0.5kg)
(Steel frame
Screen)
|
13 kg
|
Layer
|
3
|
Screen material
|
S.S304
|
Frame material
|
Carbon steel
|
If customers tell us the requirements of the shale shaker screen from the aspects of the below points, we can produce accordingly.
a. What Screen Dimension?
Specify Shaker Manufacturer & Model?(For Well-Known Shale Shaker)
Specify Shaker Screen Dimension & Picture?(For unwell-known Shale shaker)
b. How about the Screen Type?
PWP for “Hook Strip Flat Screen”
Or PMD for “Hook Strip Pyramid Screen”
Or PTC for “Steel Frame Screen”
c. What Screen Mesh/API No./Cut Point?
Give us inquired Screen Mesh?
Or Screen API No.?”
Or Screen D100 Cut Point?
***The End***
July 17, 2013
API RP 13C: An Explanation and Answers to Frequently Asked Questions-chapter 1
Brightway manufactures a full inventory of shale shaker screen that combine fluid capacity with long life.
Our screens are manufactured in a board range of mesh sizes to ensure maximum solids control efficiency regardless of the formations drilled.
In shale shaker screen production, we follow the standard of API RP 13C.
As a professional manufacture, we pay great attention on the API standard.
Let's learn the API RP 13C
Summary
API has revised the shale shaker screen testing procedures and numbering convention. By using the new API Screen Number, confusion among screen types is reduced and comparison between screen types can be made fairer. Some screens which may previously have been named “200 mesh” may now have an API Screen Number of only 100 to 140. However, ALL screens which are tested according to RP 13C and have the same API Screen Number will remove solids of a similar size.
Note: The change from using D50 to D100 (50% of a specific particle size removed versus 100%) will change the rating of most screens – the extent of the change being dependent upon screen type/design.
The new number describes the size at which particles will be rejected (removed) under laboratory test conditions. The new API number is NOT intended to describe how the screen (or indeed the shaker) will operate in the field. This will depend upon several other parameters such as fluid type and properties, shaker design, operating parameters, ROP, bit type, etc.
The greatest value of the new numbering system is that ALL conforming screens are measured using the same process which will allow cross-comparison of screen designs/types based on a uniform solids size removal value.
Any manufacturer labeling their screens as “conforming to API RP 13C” must supply the test data for that screen upon request to the end user/purchaser.
Definitions
Mesh: Mesh, as it relates to a piece of woven wirecloth, is a measure of the number of holes in a linear inch (such as 100 mesh) or in a linear inch in each direction (such as 100 x 60 mesh).
D50 Cut Point: The D50 cut point of a screen is the particle size at which half of those particles reporting to the screen will pass through the screen and half will be retained.
D100 Cut Point: The D100 cut point of a screen is the largest particle size which will pass through the screen.
API Screen Number: The API Screen Number is determined using a specific test procedure (as described in API RP 13C). The test uses a specifically graded sample of aluminum oxide, which passes through the unknown screen mounted amongst a stack of ASTM test sieves. The test method determines the D100 cut point of the test screen and relates it to the D100 of an ‘equivalent’ standard ASTM test sieve.
Screen Conductance:
Conductance, measured in kilodarcies per millimeter (kD/mm), defines a Newtonian fluid’s ability to flow through a unit area of screen in a laminar flow regime under prescribed test conditions. All other factors being equal the screen with the higher conductance number should process more flow.
Non-Blanked Area: The non-blanked area of a screen describes the net unblocked area in square feet (ft²) or square meters (m²) available to permit the passage of fluid.
***To be continued***
Our screens are manufactured in a board range of mesh sizes to ensure maximum solids control efficiency regardless of the formations drilled.
In shale shaker screen production, we follow the standard of API RP 13C.
As a professional manufacture, we pay great attention on the API standard.
Let's learn the API RP 13C
API RP 13C: An Explanation and Answers to
Frequently Asked Questions
This document is available for distribution throughout the Industry.
API has revised the shale shaker screen testing procedures and numbering convention. By using the new API Screen Number, confusion among screen types is reduced and comparison between screen types can be made fairer. Some screens which may previously have been named “200 mesh” may now have an API Screen Number of only 100 to 140. However, ALL screens which are tested according to RP 13C and have the same API Screen Number will remove solids of a similar size.
Note: The change from using D50 to D100 (50% of a specific particle size removed versus 100%) will change the rating of most screens – the extent of the change being dependent upon screen type/design.
The new number describes the size at which particles will be rejected (removed) under laboratory test conditions. The new API number is NOT intended to describe how the screen (or indeed the shaker) will operate in the field. This will depend upon several other parameters such as fluid type and properties, shaker design, operating parameters, ROP, bit type, etc.
The greatest value of the new numbering system is that ALL conforming screens are measured using the same process which will allow cross-comparison of screen designs/types based on a uniform solids size removal value.
Any manufacturer labeling their screens as “conforming to API RP 13C” must supply the test data for that screen upon request to the end user/purchaser.
Definitions
Mesh: Mesh, as it relates to a piece of woven wirecloth, is a measure of the number of holes in a linear inch (such as 100 mesh) or in a linear inch in each direction (such as 100 x 60 mesh).
D50 Cut Point: The D50 cut point of a screen is the particle size at which half of those particles reporting to the screen will pass through the screen and half will be retained.
D100 Cut Point: The D100 cut point of a screen is the largest particle size which will pass through the screen.
API Screen Number: The API Screen Number is determined using a specific test procedure (as described in API RP 13C). The test uses a specifically graded sample of aluminum oxide, which passes through the unknown screen mounted amongst a stack of ASTM test sieves. The test method determines the D100 cut point of the test screen and relates it to the D100 of an ‘equivalent’ standard ASTM test sieve.
Screen Conductance:
Conductance, measured in kilodarcies per millimeter (kD/mm), defines a Newtonian fluid’s ability to flow through a unit area of screen in a laminar flow regime under prescribed test conditions. All other factors being equal the screen with the higher conductance number should process more flow.
Non-Blanked Area: The non-blanked area of a screen describes the net unblocked area in square feet (ft²) or square meters (m²) available to permit the passage of fluid.
***To be continued***
July 10, 2013
Solid Control System 400 GPM
Glad to introduce our solids control system with capacity as 400 GPM.
Solids control system is also be called as drilling fluids system, or mud recycling system or mud system.
The galvanizing treatment applied in this system does give an impressive effect, doesn't it? And this galvanizing treatment is to strengthen the anti-rust performance to be much better than the normal painting process.
Where the galvanizing treatment are applied in this system? We can read from the picture with the results as below.
1. 1 set galvanizing shale shaker, no corner missed in this process, even inside the buffer box, you can see the shining galvanizing treatment.
2. 2 sets mud agitator with galvanizing impeller.
3. 1 set jet mud mixer with galvanizing hopper
4. walkways, guardrail, ladder rail, ladder steps, galvanizing everywhere.
Welcome any comments or enquiry for the solids control system or for the separate equipment.
Alice
brightway@bwsolidscontrol.com
Solids control system is also be called as drilling fluids system, or mud recycling system or mud system.
 |
| solids control system 400GPM |
The galvanizing treatment applied in this system does give an impressive effect, doesn't it? And this galvanizing treatment is to strengthen the anti-rust performance to be much better than the normal painting process.
Where the galvanizing treatment are applied in this system? We can read from the picture with the results as below.
1. 1 set galvanizing shale shaker, no corner missed in this process, even inside the buffer box, you can see the shining galvanizing treatment.
2. 2 sets mud agitator with galvanizing impeller.
3. 1 set jet mud mixer with galvanizing hopper
4. walkways, guardrail, ladder rail, ladder steps, galvanizing everywhere.
Welcome any comments or enquiry for the solids control system or for the separate equipment.
Alice
brightway@bwsolidscontrol.com
July 09, 2013
Compact drilling mud mixing system
Kindly see Brightway compact drilling mud mixing system with capacity between 20m3/h to 60m3/h.
This system is suitable for the horizontal directional drilling.
Alice
This system is suitable for the horizontal directional drilling.
 |
| mud mixing system |
brightway@bwsolidscontrol.com
Brightway mud recycling system in 500 GPM for Horizontal directional drilling
Let's have a look at Brightway mud recycling system in 500GPM for horizontal directional drilling.
 |
| Mud recycling system for horizontal directional drilling |
Equipments
included:
1xlinear motion
shale shaker BWZS7--3P
1xmud cleaner
BWZS70-2S12N
2x centrifugal pump for mud cleaner
1x electronic control
system
We can provide
the mud recycling system according to customer requirement.
Alice
brightway@bwsolidscontrol.com
86-29-89300061
Subscribe to:
Posts (Atom)